
Utility Boost
Utility Boost is BLAMMO! Electronics' two-channel boost, pairing a fixed-wah style mid boost with a flat clean boost and adding a buffer that can keep working when the pedal is off. It is assembled by hand in Portland, Oregon, in a matte army-green enclosure with top-mounted jacks. The first channel recreates the sound of a wah pedal parked in one position, the 'cocked wah' tone that pushes a narrow band of midrange forward. The Frequency knob chooses where that peak sits, sweeping between the bright, toe-down end of a wah's travel and the darker, heel-down end, so the emphasis can be tuned to the guitar and amplifier. The second channel is a linear op-amp boost that raises the whole signal evenly. By default it is set louder than the wah channel, and an internal trimmer adjusts its gain, down to unity or lower when the two channels need to be matched. Both circuits share one Volume knob. Of the two footswitches, one turns the pedal on and off and the other, marked Channel, swaps between the boosts. A green LED shows that the pedal is active and a yellow one that the flat boost is selected. Switching is by relay, with no mechanical click. The buffer is based on the one in the Klon Centaur and can be left engaged in bypass, which helps preserve high frequencies over long cable runs and crowded pedalboards; true bypass is the alternative. The circuit board is a hybrid of surface-mount and through-hole parts with Panasonic coupling capacitors and board-mounted pots.



