
Payola Drive
Payola Drive is a light-to-heavy overdrive from BLAMMO! Electronics, handmade in Portland, Oregon, and described by its maker as a distant cousin of the Tube Screamer. It takes the mid-forward push of that family and pairs it with a more open, Timmy-like voicing, then fixes the bass and treble response internally so the front panel stays simple. What sets the circuit apart from the usual low-gain drive is its clipping. Most overdrives commit to either soft clipping in the feedback loop or hard clipping to ground. The Payola Drive uses a mix of both diode arrangements, which gives it a wider span than a typical pedal of its type: clear and close to transparent at one end, harmonically dense and gritty at the other. A LESS / MORE switch moves between those two characters, with LESS giving light breakup and MORE a fuller, heavier drive. The Gain knob has a long sweep, and because the upper part of its range adds a lot of level you may need to bring the volume down as you turn it up. Tone is a passive filter. Set low, the pedal also works as a boost that adds a mid-frequency push to whatever follows it. The footswitch is a no-click type with two behaviours. Tap it for normal latching on and off, or hold it and it works momentarily, staying engaged only while your foot is down. The pedal is true bypass, with top-mounted jacks, in a green 125B enclosure. It suits players who want one overdrive to cover edge-of-breakup rhythm and a thicker lead voice.



