
EP-Pro
EP-Pro puts the circuit of Xotic's EP Booster into a volume pedal. The EP Booster, introduced in 2008, is a small FET preamp in the style of the preamp stage of the Echoplex tape delay. The EP-Pro combines that preamp with an active 250k volume treadle and adds tone controls and switching, to make what Xotic calls a multi-functional preamp and volume pedal, or an always-on tone enhancer. The preamp section has Gain, Treble, Bass and Volume controls mounted on the side of the chassis. Gain supplies up to 20 dB of boost, the two-band EQ offers 15 dB of cut or boost in each band, and Volume sets the level after the boost. Four internal DIP switches change the voicing: two add a full-band lift and two add a high shelf, one around 6 kHz and one around 10 kHz. A heavy-duty footswitch turns the boost on and off, so the EP-Pro can serve as a plain volume pedal when the preamp is not wanted. An internal switch decides what the boost-off state is. In true bypass mode the signal passes through a passive 250k pot; in buffered mode it goes through a buffer before the output. The treadle mechanism comes from Xotic's XV volume pedals, with a nylon pivot and adjustable torque, in a newly designed aluminium chassis. Xotic suggests four positions for it: in front of a valve amplifier, in the amplifier's effects loop, after drive and modulation pedals but ahead of delays, or at the front of a digital rig to set the level going into a modeller. It draws no more than 10 mA, so a 9-volt battery lasts about 40 hours, and a regulated 9 to 18-volt adapter can be used instead.



