
La Brea Analog Tape Drive
Tape saturation is usually a digital emulation, a clever model of what a tape machine does when pushed hard. La Brea does it in the analog domain instead. It is a fully analog drive with no digital processing in the signal path, running internally at 24V, and it takes its voices from the tape side of Strymon's Deco pedal, using similar pre-emphasis and de-emphasis techniques. Strymon analog engineer Josh was inspired by Pete Celi's white paper on Deco's development, and spent roughly ten years experimenting before arriving at this design. Tape Sat sets the saturation amount, from light overdrive through heavy distortion into fuzz, while a two-position Gain switch, norm or high, sets the range of that control. Level controls the output of the saturation circuit and can go down to zero. The Dry control is the clever one: a variable clean path from off to a 6 dB boost that stays in phase with the saturated signal, so you can blend in clean signal, or use the clean path alone as a boost or cut. A three-position Shift switch contours the high frequencies, adding top-end sparkle at High or high-midrange bite at Mid. La Brea is part of Strymon's Series A, an analog-only line with no MIDI, USB or firmware. It has a JFET-buffered input and a low-impedance output, with true bypass and an amber LED. For players who want warm, compressed saturation and a flexible blend path, it offers a distinctly different kind of drive.



