
Bandit Supreme Teal Stripe Preamp Pedal
Bandit Supreme Teal Stripe Preamp Pedal is Peavey's own amp-in-a-box version of two of its amps from around 1990. It recreates the lead channel of the second-generation Bandit 112 and Supreme 160, known as the "Teal Stripe" models, and fits that circuit into a pedalboard enclosure as part of the company's Legacy preamp series. The distortion comes from SUPERSAT, Peavey's transistor-based simulation of tube distortion, which uses soft clipping to round the signal off instead of chopping it flat. The SUPERSAT control sets the amount of distortion, Post Gain sets the output level, and a Gain switch lifts the overall gain when the standard range is not enough. The tone section is a three-band active EQ that keeps the amp's own vocabulary. Bottom is a low shelf, Body is a midrange peak or notch, and Edge is a high shelf, each with up to 15 dB of boost or cut. A Shift switch moves the Body control to a higher or lower operating frequency, which changes where the midrange push or scoop lands and so reshapes the whole voice. Inside, the pedal generates its own bipolar 18-volt supply from a standard 9-volt adaptor or a battery, so the circuit runs at a higher voltage than the power jack suggests. Bypass is a hard bypass with anti-click circuitry. Peavey intends the output to go wherever a preamp can go: a power amp, an effects return, a mixer, a recording setup or the input of an instrument amp. The result is that lead channel without the cabinet: a compact high-gain preamp with an unusually flexible midrange.



