
Minimal Series MIDI Input Selector
Minimal Series MIDI Input Selector is One Control's pocket-sized switcher for players who bring two instruments to one signal chain. It chooses between input A and input B and passes the selected source to a single output, in mono or full stereo, which covers anything from a pair of guitars to two stereo synths or other line-level sources. The audio path is passive and true bypass, which means nothing is added to the tone of whichever instrument is live. Connected backwards it becomes a stereo A/B box, sending one source to either of two destinations. The footswitch works in two modes. In Standard mode, shown by a red LED, each press toggles between the inputs. In Flash mode, shown by a white LED, input B is selected only while the switch is held and the pedal returns to the original input on release. The mode is set at power-up by holding the footswitch while the adapter is connected. The MIDI In jack lets a rig controller do the switching. A DIP switch on the side sets the receive channel, and the LED flashes the channel number when the pedal powers up. Program Change 0 selects input A and Program Change 1 selects B, or Control Change 102 does the same job with values below and above 64, so a loop switcher or floor controller can change instruments as part of a preset. The case is tiny, about 35 by 48 by 98 mm and 127 g, and the pedal draws 60 mA from a 9 V supply. It went on sale in Japan at the end of August 2025 and reached One Control's international shop that October.



