Guitar
Pedal
Finder

ExploreBrandsGuidesPedalboardsFAQ
  1. Home
  2. /
  3. Lantern Manufacturing
  4. /
  5. Verbena
Lantern Manufacturing Verbena
Lantern Manufacturing

Verbena

Verbena is Lantern Manufacturing's reverb pedal, and the maker's own label for it, a 'DRAMatic' reverb, is a clue to how it works. It does not use a modern DSP chip running code. The reverb is built from dynamic RAM chips and logic circuitry, technology of the 1980s and early 1990s, surrounded by filters and a dense network of modulation and feedback, and the maker stresses that no programming is involved. It takes a mono input and produces a stereo output. The controls reflect that hardware. Pre-Delay runs from nothing to about three seconds, with the sound becoming more degraded as the time lengthens. Diffuse sets the duration of the reverb, from short chorus- and flanger-like effects at one end to settings beyond a slapback at the other, and at its lowest it brings out resonances from the delay lines. Dwell is the feedback amount, which reads as room size and decay and can tip into runaway repeats. Mix goes from fully dry to fully wet. Three further features can be combined freely with the basic reverb. Pitch transposes part of the feedback network by up to an octave in either direction in semitone steps, with noon as unity. Move adds a fixed-depth modulation whose speed ranges from off to something close to ring modulation, shown by an LED. A Reverse footswitch plays the reverb backwards, provided some pre-delay is dialed in. Internal switches select stereo or summed-mono output and decide whether trails continue after bypass. The pedal needs power to pass signal even when bypassed, runs on a 9-volt center-negative supply and has no battery option.

Categories

ReverbPitch ShifterReverseStereo
Buy on AmazonView on Reverb