Guitar
Pedal
Finder

ExploreBrandsGuidesPedalboardsFAQ
  1. Home
  2. /
  3. K.E.S
  4. /
  5. RAMBLING SHEEP
K.E.S RAMBLING SHEEP
K.E.S

RAMBLING SHEEP

RAMBLING SHEEP is the first handmade effect pedal from K.E.S, a brand of the Japanese company Kikutani Music, and it tackles a familiar complaint about 1970s Big Muffs. However good they sound alone, the maker argues, their midrange saturates in a band mix and riffs and solos get buried, while cutting gain or EQ to compensate throws away the thickness that made the fuzz appealing. The answer here is a BLEND knob, though not the usual clean blend. In parallel with the fuzz runs a valve-emulating preamp built on a J201 JFET, with a crunch of its own. Turned down, the pedal leans towards the fat sound of early Muffs; turned up, it layers in a saturated clean-to-crunch signal that adds clarity and cut without the two sounds pulling apart. Because the parallel paths share a ground and every control affects level, turning BLEND fully down silences the pedal, which the maker stresses is by design. The fuzz itself was developed from close study of two vintage units, a 1974 example with FS36999 "White Can" transistors and a 1976 BC239C version. K.E.S uses TO-105 type transistors, new-old-stock Allen Bradley carbon composition resistors and selected capacitors, some of them vintage. Clipping is in two stages and combines 1N914 silicon diodes with infrared LEDs, a pairing the builder says raises headroom while keeping long sustain. Kikutani lists several Japanese guitarists who have put the prototype on their live and recording boards, one of them after trying it at the 2024 Tokyo Pedal Summit. The pedal runs on 9-volt DC with a centre-negative plug, draws 7 mA and measures 96 by 131 by 56 mm.

Categories

Fuzz
Buy on AmazonView on Reverb