
3 Series Pherb
The 3 Series Pherb puts a lo-fi reverb and a four-stage phase shifter in one tiny box, with both effects on all the time. The signal goes through the reverb first, then through the phaser, and the result is recombined with the dry signal. The reverb is dark and moody with a chorus-like chunkiness, and at longer decay settings it slightly pulses. The phaser is a vintage-style four-stage design with the feedback removed, and its notch sweeps are shifted higher so they do not muddy the low mids of the reverb. That is what keeps the pairing musical instead of murky. Controls are kept to three knobs and one toggle. Mix sets the reverb and phaser level, Speed sets the phaser rate from 0.05 Hz to 5 Hz, and Length sets reverb decay and pre-delay together, with decay running from roughly a quarter of a second to nearly fifty seconds. Higher Length settings also bring out more phasing. Turning Speed fully counterclockwise disables the phaser in normal mode and leaves only the reverb. The BREAK toggle changes the character: engaged, the input first passes through an asymmetric bitcrusher with analog-style clipping, ahead of the reverb and phaser, and the phaser can no longer be disabled. Input and output jacks sit on the right and left sides, and the pedal runs on 9V DC at 70 mA. It is a small, strange and very atmospheric corner of the 3 Series.



