Guitar
Pedal
Finder

ExploreBrandsGuidesPedalboardsFAQ
  1. Home
  2. /
  3. JCA Pedals
  4. /
  5. Machine Head (Purple Edition)
JCA Pedals Machine Head (Purple Edition)
JCA Pedals

Machine Head (Purple Edition)

Machine Head (Purple Edition) is a limited, higher-gain version of the Machine Head pedal from JCA Pedals, a German maker of effects and amplifiers in which one person handles everything from design to final testing. The standard Machine Head is an overdrive built to deliver Ritchie Blackmore's guitar sound of around 1972, the tone of Fireball, Machine Head and Made in Japan. The Purple Edition keeps that brief, has more gain than the regular model and comes in a deep purple finish, with a serial number and the builder's signature on the back plate. The interesting design decision is what the pedal does not try to do. That sound came from a chain of equipment, which the description lists as a treble booster, an Aiwa preamp and a high-powered tube amplifier. JCA does not model each link separately. A single circuit is voiced to give the result of the whole chain in one box. The description stresses that it behaves like a good tube amp: the tone follows pick attack and the guitar's volume control, and some players run it straight into an impulse-response loader. There are three controls. Volume sets the output and has a great deal of level available, with the Blackmore setting said to sit between nine and twelve o'clock. Drive sets the gain. Cut shapes the high frequencies in the manner of the Cut control on a Vox AC30, with two o'clock suggested as a starting point. Power comes from a standard 9-volt center-negative supply at a very low 5 mA, and there is no battery option. The edition is described as limited, though no quantity is given.

Categories

OverdriveDistortion
Buy on AmazonView on Reverb

Similar Pedals from JCA Pedals

JCA Pedals Texas Flood SE
JCA Pedals

Texas Flood SE

Overdrive
JCA Pedals The Reverend
JCA Pedals

The Reverend

Overdrive