Guitar
Pedal
Finder

ExploreBrandsGuidesPedalboardsFAQ
  1. Home
  2. /
  3. Hagerman Amplification
  4. /
  5. Tubifier Stereo - Tube Buffer
Hagerman Tubifier Stereo - Tube Buffer
Hagerman Amplification

Tubifier Stereo - Tube Buffer

Solid-state and digital gear can sound a little clinical, and the Tubifier Stereo is built to fix that without asking you to do anything. It is an always-on vacuum tube buffer that adds compression and a fuller, thicker tone, giving solid-state or digital rigs a tube-like feel. There are no knobs and no footswitch: it is set at the factory to unity gain, so level stays where you left it, and it simply sits in the signal path quietly doing its job. This stereo version uses a 6BF7 dual triode, which replaced the 6088 tube in the original Tubifier. The two halves of the tube provide the two channels, and according to the maker the choice also eliminates microphonics, the tendency of tubes to ring when bumped. Placement is flexible: it can go anywhere in the chain, and the maker suggests putting one channel at the start of a pedalboard and the other at the end, so the tube touches both what goes in and what comes out. Bandwidth runs from 30 Hz to 30 kHz, input impedance is 100k ohms and output impedance is 10k ohms. Distortion is rated at 10 percent at 500 millivolts, varying with the tube. Power is 9V DC at 300 mA, and if you want a footswitch the maker points to its separate VALVE pedal.

Categories

BufferStereoPreamp
Buy on AmazonView on Reverb

Similar Pedals from Hagerman Amplification

Hagerman Vulture Skull - Tube Overdrive
Hagerman Amplification

Vulture Skull - Tube Overdrive

Overdrive