
Big Muff Pi 2 with Tone Wicker
This version of the Big Muff Pi 2 takes the op-amp-based fuzz revived from a long-lost 1970s design and adds a pair of switches that give you more control over the tone. The circuit is analog, uses two dual op-amps and keeps the familiar Volume, Tone and Sustain controls of the standard version. The additions are the Tone switch and the Wicker switch. The Tone switch, when on, enables the Tone knob just as on a regular Big Muff Pi 2. When off, it bypasses the knob and its circuitry entirely for a full-range, unfiltered fuzz. The three-position Wicker switch adds high-frequency content. Off gives the standard Big Muff Pi 2 sound, Half adds some top end and Full opens up the high-frequency bandwidth for a brighter, clearer sound. The Wicker is especially helpful when the Tone knob is turned low, which otherwise darkens the fuzz and can hide your pick attack. With the switch on Full, you can keep the thick low-end character of a dark tone setting while still letting the notes cut through a band mix. Practical features include a soft footswitch with a status LED that goes dark in buffered bypass, and holding the switch for more than half a second gives momentary fuzz. That action can be disabled. Power comes from an included nine volt battery or an optional center-negative adapter. Relative to the standard Big Muff Pi 2, it is the same circuit with a lot more tonal control, ideal for players who want the sharper Muff voice without being stuck with its darker side.



