
Okhtyrka Honey Bee Overdrive
Okhtyrka Honey Bee is Drunk Beaver's take on the BJFE Honey Bee, the low-to-medium-gain overdrive that Björn Juhl voiced after a well-worn 1960s Supro amp. It was Pedal Drop #32 from the Ukrainian builder, a single batch of 25, and it treats the Swedish original as a starting point for refinement instead of copying it. The signal first meets an input buffer in the style of Pete Cornish, built on a new-old-stock KT3102 transistor, which isolates the guitar from the rest of the circuit. The drive stage is a Tesla MAC157, the Czech-made counterpart of the CA3130 op-amp, again from old stock, and the clipping pairs germanium diodes with LEDs; Guitar Pedal X's report on the drop also lists NOS Telefunken SAY-12 diodes in the hard-clipping position. A J113 FET stage, tuned for that part, sits at the output. Three knobs set Drive, Volume and Nature, and it is the last that carries the Honey Bee's character. Nature is a tone control whose behaviour depends on a two-position Mode toggle: with the switch up it adds low end, and with the switch down it works as a low-pass filter, shaving treble for a tighter sound. A trimmer on the board sets the brightness of the status LED. The Honey Bee has always been valued for touch sensitivity at low gain more than for saturation, and this version keeps to that brief while using parts with histories of their own from Soviet-era and Central European factories. It runs on a standard 9-volt centre-negative supply, draws about 6 mA and has no battery option.



