
Hello Beaver Distortion
Hello Beaver Distortion is a colourway of Drunk Beaver's Distortion, builder Vitalii's extended take on the Boss DS-1. It swaps the usual look for pink kawaii-style graphics, a treatment that began as a customer's request, and it is a re-skin with no circuit changes described. The first batch is limited to 10 pedals, and a matching T-shirt was produced alongside it. Underneath the graphics is a modified version of the original 1978 Japanese-made DS-1 circuit, with far more adjustment than the three-knob classic. Level, Dist and Tone work as expected, setting output, gain and the balance of lows and highs. A three-position Mids toggle then addresses the DS-1's scooped midrange, offering the stock scoop, a reduced scoop or flat mids. The centre of the pedal is an eight-way Mode switch that changes the clipping. The options run from a diode-free boost through LEDs, vintage silicon diodes in the 1978 style, 1N914s in the 1994 style, asymmetrical germanium using old-stock Soviet D9 diodes, asymmetrical silicon, MOSFETs and 1N4001 diodes. Each alters how hard and how smoothly the signal clips, so one enclosure covers a wide spread of distortion characters. Two further toggles go deeper. One swaps the op-amp between a modern TI RC4580 and an old-stock Japanese chip similar to the one used from 1994 to 2000. The other, labelled Muff, adds a Big Muff-style transistor gain stage for a fatter, more compressed sound. The pedal is true bypass, and an internal trimmer sets the brightness of the status LED. It amounts to a study of the DS-1 in one box, wearing an unusually cheerful finish.



