
Crossover Fuzz (Limited Edition White, Reverb Exclusive)
This is the limited white edition of Death By Audio's Crossover Fuzz, released alongside the standard black pedal and capped at 150 units worldwide, all sold through Reverb. The enclosure is all white; the circuit, controls and jacks are those of the black version already in the directory. The Crossover Fuzz borrows an idea from loudspeaker design. A crossover splits a signal into low and high bands, and here each band gets its own Death By Audio fuzz with separate Gain and Volume controls, so the bottom of a chord can be saturated differently from the top. The split is made by two analog resonant filters, a low-pass and a high-pass, that move together under a single FREQ control, and a RES knob takes them from smooth through sharply peaked to self-oscillation. LEDs shift with the filter position, in one of two colour schemes chosen with an internal switch. Because the two bands are separate signals, routing becomes part of the sound. The pedal has two inputs and two outputs, the outputs labelled for highs and lows, and it can run in mono, mono to stereo, stereo to mono or full stereo. The low fuzz can feed one amplifier while the high fuzz goes to another, or each can pass through different effects. A side jack accepts an expression pedal or a 0 to 5 volt control voltage to sweep the filter frequency, with the FREQ knob setting the lowest point the sweep reaches. The signal path is entirely analog. Death By Audio, based in Queens, New York, builds its pedals by hand and covers them for life. This one draws 120 mA from a 9-volt supply.


