
Anagram Press Expression Pedal
Darkglass Electronics, known for its bass distortion and modeling gear, makes an expression pedal that is tuned for its Anagram multi-effects unit. It is a small, pedalboard-friendly controller, and its job is simple: put your foot on parameters that would otherwise need a hand on a knob. There are no knobs or switches on the pedal itself. The treadle is the control, sweeping through filters, shaping dynamics or morphing parameters on whatever you assign to it. A row of LEDs shows the pedal position, so you can read where it sits at a glance on a dark stage, and the lights turn off when the cable is unplugged. Response is smooth and linear, which makes sweeps feel predictable. Power is flexible. There is a built-in battery compartment for an optional nine volt battery, which drives the LEDs, so you can run it without additional cabling. Connectivity uses a quarter-inch jack rated at 10k ohms with a linear taper, wired for TRS use and also offering a dedicated Anagram connection. That linear 10k taper means it should behave well with other gear that expects a standard expression input. Compared with a standard full-size volume or expression pedal, this one is compact and tied closely to a single partner device. If you play an Anagram and want to automate its effects by foot, this pedal is the natural companion, with the LED display as its signature touch.



