
Knightpass Filter
Knightpass Filter is a limited-run release from Catalinbread's Knight School range, a stripped-down state-variable low-pass filter with onboard gain. It is a standalone design rather than a repaint of an existing pedal, and its purpose is to give a dirt pedal a more dramatic filter than the simple passive control found on something like a Rat. The Filter knob sets the cutoff, sweeping from about 9 kHz down to 280 Hz. Gain is a potentiometer in series with the input that works like a guitar's volume control, so it can stay high if the pedal is first in the chain but needs finer adjustment elsewhere, and it adds grit to the signal. Resonance feeds some of the signal back for a more synth-like voice, and at maximum it sounds juicy without pushing the filter into oscillation. Because the state-variable design attenuates more steeply than a passive filter, the effect is more pronounced and synth-like. It is meant to act as a tonal enhancer and sounds especially good stacked with a distortion or fuzz. The pedal takes a 9 volt centre-negative supply, and other polarities, voltages or AC can damage it. Among filter pedals it is a plain low-pass design with no envelope or wah behaviour, and within Catalinbread's range it is a simple tone-shaping tool.



