
Galileo 4K
Galileo 4K is the newest version of Catalinbread's Galileo, an overdrive built as two classic British circuits in a row: a Rangemaster-style treble booster feeding an emulation of a Vox amplifier. The maker calls the 4K the next chapter for the pedal. The Rangemaster-into-Vox chain is left intact, and what changes is the equalisation. The shop text does not explain the 4K name. The earlier Galileo had a single Tone knob, which worked as a treble control while also governing the low end, so brightness and bass could not be set separately. The 4K replaces it with a two-band Baxandall EQ with separate Treble and Bass knobs. Catalinbread says it also tried an AC30-style tone stack during development before settling on this arrangement. The stated aim is to add flexibility to what had been a fairly rigid circuit without changing its core character. Treble, at its maximum, lifts the range from around 2 kHz upwards, and at its minimum pulls that range down heavily. Bass behaves much like the depth control found on some amplifiers: fully up it reinforces frequencies around 100 Hz and below, and fully down it cuts steeply around 200 Hz and removes much of the sub-bass. Between them the two knobs allow a bright guitar to be tamed or a dark one opened up, where the old Tone control forced a compromise. Gain works as it would with the original hardware. It sets the gain of the treble booster at the front, while the gain of the amplifier section is fixed, so more drive comes from hitting the amp circuit harder. Volume sets the output. The pedal accepts a 9 to 18 volt centre-negative supply.



