
BM-14M Analog Delay
BM-14M is Behringer's replica of the Moog Moogerfooger MF-104M, the MIDI-equipped analog delay Moog introduced in 2012. Like the original it is a bucket-brigade design, passing the signal along a chain of capacitors inside an analog chip, and it shares the large format and rear-panel patch points of the other Behringer Moogerfooger-style units. Thomann opened preorders in early September 2025. Launch coverage puts the maximum delay at about 800 milliseconds. A range switch divides the span in two, a short setting with brighter repeats and a long setting with darker ones, reflecting the way bucket-brigade chips lose high frequencies as they are clocked more slowly. Time and Feedback do the expected jobs, Drive adds saturation at the input, and Mix and Output Level set the balance and volume. Modulation is more developed than on most analog delays. An LFO with six waveforms, chosen on a rotary switch, modulates the delay, with Rate and Amount controls that take it from a light chorus-like shimmer to wide swings of pitch. A second footswitch handles tap tempo and can be applied to either the delay time or the LFO rate, and a spillover mode lets the repeats die away naturally after the effect is switched off. The back panel carries expression or control-voltage inputs for Time, Feedback, Mix, LFO Rate and LFO Amount, a MIDI input, and a feedback insert, which lets another effect be patched into the repeat path so that every echo passes through it again. One visible departure from the Moog is the panel layout, which puts the delay controls on the lower row instead of the upper one.



