
BM-13 Phaser
BM-13 is Behringer's replica of the Moog Moogerfooger MF-103 12-Stage Phaser, an analog phaser built into a large wood-sided enclosure with the patch points of a synthesizer module. Preorders opened in July 2025 and the first units reached European shops the following month. A phaser passes the signal through a chain of all-pass stages and mixes the result with the original, which carves a set of moving notches into the frequency spectrum. The number of stages decides how many notches there are, and the BM-13 offers a choice: a switch selects six stages for a classic, open swirl or twelve for a denser, more vocal sweep. Sweep sets the centre position of the effect, and Resonance feeds the output back in to sharpen the peaks between the notches. Movement comes from an LFO with Rate and Amount controls and a Lo/Hi range switch. Its span is unusually wide, reported as 0.01 to 250 Hz, so it can drift almost imperceptibly or run fast enough to reach audio rates, where the sweep stops sounding like motion and becomes a rougher, clangorous texture. Drive sets the input gain and Output Level trims the result. Connections follow the Moog original. Expression or control-voltage inputs are provided for Sweep, Resonance, Rate and Amount, so a pedal on the Sweep input can move the phaser by foot. An LFO output can modulate other equipment, and an auxiliary output next to the main one gives a pseudo-stereo spread when both are used. Power is 9 volts DC from an adapter, with no battery option.



