Guitar
Pedal
Finder

ExploreBrandsGuidesPedalboardsFAQ
  1. Home
  2. /
  3. Behringer
  4. /
  5. BM-12 Ring Modulator
Behringer BM-12 Ring Modulator
Behringer

BM-12 Ring Modulator

BM-12 is Behringer's analog replica of the Moog Moogerfooger MF-102, a ring modulator with its own low-frequency oscillator, housed in a large wood-sided pedal in the style of the original. First teased in 2023 as the BM-102, it was announced as a production model in July 2025 and was in shops the following month. A ring modulator multiplies the incoming signal with a second tone, the carrier, and outputs the sums and differences of their frequencies in place of the original pitches. The results are the clangorous, bell-like and metallic sounds the effect is known for, and with a very low carrier, a form of tremolo. On the BM-12 the Frequency knob tunes the internal carrier oscillator, a Hi/Lo switch selects its range, and Mix sets the balance between the untreated signal and the modulated one. Drive adjusts the input gain ahead of the modulator. The LFO section then moves the carrier frequency up and down. Rate and Amount set the speed and depth, and a switch selects a sine wave for a smooth sweep or a square wave for a jump between two pitches, which is the source of the stepped, robotic patterns ring modulators are capable of. The rear panel is where the modular heritage shows. Next to the audio input and output are expression inputs for Rate, Amount, Mix and Frequency, an LFO output, and both a carrier output and a carrier input, so that an external signal can stand in for the internal oscillator. The pedal runs from a 9-volt adapter only.

Categories

Ring ModulatorModulator
Buy on AmazonView on Reverb

Similar Pedals from Behringer

Behringer 69 Vibe
Behringer

69 Vibe

Vibrato
Behringer ADI21 V-Tone Acoustic Driver DI Pedal
Behringer

ADI21 V-Tone Acoustic Driver DI Pedal

Multi-Effects
Behringer B-Flanger
Behringer

B-Flanger

Flanger
Behringer B-tron III - Envelope Filter
Behringer

B-tron III - Envelope Filter

Filter