
PALA
Compressors usually ask you to choose between transparency and character, and PALA begins from a request to avoid the pumping often heard in OTA-based designs. It started as a commission for a transparent compressor, then evolved into something that evokes a loud amp in a reverberant room, a clean sound that lives close to the edge of feedback. Under the hood it is a feed-forward, OTA-style compressor, which is the kind of topology most associated with that pumping behaviour, so the tuning here is the interesting part. The preamp stage is loosely modelled on the feel of a Bassman 10 with an ultra-linear transformer, and the maker describes it as dry and slightly trashy rather than polite. A treble control gives up to 10 dB of boost or cut. A dry path control blends in an uncompressed, low-passed signal, intended for bass, keys and other instruments where the low end should stay intact while the rest is squeezed. The headroom setting matters too: at its highest position the preamp clipping is bypassed and the pedal accepts up to five volts peak to peak without distorting, which makes it usable with hot line-level sources. It is designed for both instrument and line levels and can drive 10K ohm loads without losing frequency content. Switching is true bypass via a soft-touch relay, and power input is protected against reverse polarity and over-voltage. A compressor aimed at players who want control without sterility.
